TS16949内审员考试试题 单项选择(4*15=60)
TS16949 auditor examination questions multiple choice ( 4 * 15 = 60)
( )1. TS16949第一个技术规范发布于:
( TS16949 ) 1 specification was released in the first:
A 1986年 B 1987年 C 1999年 D 2002年
A B C D in 1986 1987 1999 2002
( )2下列哪种情况变更，可以不用更改控制计划:
( 2 ) which of the following circumstances change, can not change control plan:
A FMEA B 易损工装 C 物流 D 制造过程
A FMEA B perishable tools C logistics D manufacturing process
(    )3. 可疑产品包括:
( 3 ) the suspected products including:
A没有标识的产品  B标识不明的产品
A does not identify the product B identification of unknown products
C用偏离校准状态的仪器检验的产品  D:A+B+C
C departure calibration of test equipment product D: A+B+C
(    )4. 反应计划可包括：
( ) 4 reaction plan includes:
A: 限制过程输出和100%检验；      B: 标识和隔离
A: limitations of process output and the 100% test; B: identification and isolation
C: 机床调整（发觉机床偏离设定状态时） D: A+B+C
C: machine tool adjustment ( find the machine from a set state ) D: A+B+C
(    )5.质量理体系业绩的评定方法是:
( 5 ) quality management system performance evaluation method:
A顾客满意度   B产品检测  C过程监控  D:A+B+C
Customer satisfaction product testing C B A D : A+B+C process monitoring
(    )6. 全尺寸检查的周期为:
( ) 6 full size inspection cycle:
A ：3个月  B ：6个月  C：12个月  D:以上都不对
A: 3 months B: 6 months C: 12 months D: above all wrong
(    )7.TS16949：2002版中明确指定顾客代表的数量为多少名?
( 7.TS16949: 2002 Edition ) explicitly specified in the customer representative of the number of how many?
A一名         B:二名      C:二名以上     D:不限定
A A B: two C: more than two D: no limit
(    )8. 下列说法正确的是:
( 8 ) the following statement is correct:
A: 负责产品质量的人员，为了纠正质量问题，必须有权停止生产；
A: personnel responsible for product quality, in order to correct quality problems, must have the authority to stop production;
B: 组织必须对作业准备的验证采用首末件（批）比较的方法；
B: tissue must be on the job preparation validation using first / last ( batch) comparison method;
C: 组织必须制订样件计划和控制计划；
C: organizations must develop a prototype programme and control plan;
D:评审或更新后的控制计划必须经过顾客批准。
D: after review or update of the control plan must be approved by the customer.
(    )9.下列说法错误的是:
( 9 ) the following statement is wrong is:
A: 外部实验室必须通过iso/IEC17025或等同的国家标准或客户的认可；
A: external laboratory must pass through a ISO / IEC17025 or equivalent national standards or customer recognition;
B: 对从事外观检查的人员资格必须验证 ；
B: in appearance inspection personnel qualification must be validated;
C: 组织的供应商必须通过TS16949的外部咨询；
C: organization of the supplier must pass through a TS16949 external advisory;
D:全尺寸检查是对设计记录上显示的所有产品尺寸进行的测量。
D: full size examination is designed to record all product dimensions measurement.
(    )10. 不合格控制的目的:
( 10 ) the unqualified control purposes:
A:使顾客满意           B:防止不合格品的非预期合用  
A: make customer satisfaction B: prevent reject unintended share
C:减少质量损失         D改善产品的特性
C: reduce the quality loss of D products to improve the properties of
(    )11.TS16949技术规范对工程规范评审时间要求不超过:
( 11.TS16949 ) specification on engineering specification review time not exceeding:
A:3天   B:一周   C:二周   D:一个月
A: B: 3 days a week for two weeks of C: D: one month
(    )12.下列哪个不是产品设计输出:
( 12 ) which of the following is not the product design output:
A:DFMEA  BPFMEA     C: 防错    D:产品特殊特性和规范
A: DFMEA BPFMEA C: error proofing D: product special characteristics and specifications.
(    )13.组织可以剪裁质量管理体系要求:
( 13 ) the organization can cut the requirements of quality management system:
A:组织可以自行定义         B:仅限于第7.3节相关内容
A: organizations can define its own B: restricted to Section 7.3.
C:可以是第7.3节      D:以上都不对
C: can be a Section 7.3 D: above all wrong
(    )14.质量目标应是:
( 14 ) the quality objectives should be:
A:没有要求     B:是已达到的   C:可测量的    D:B+C
A: does not require B: has reached C: D : B+C can be measured
(    )15:多方论证方法可包括组织的(     )
( ) 15: a multidisciplinary approach may include tissue ( )
A:设计人员   B:制造人员   C工程人员     D:A+B+C
A: Designer B: manufacturing personnel personnel of engineering of C D: A+B+C